TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1250 of 1558
TM 9-2320-366-20-4 16-23. M1089 TOOL BOX REPLACEMENT/REPAIR (CONT) (14) Route terminal lug TL20 (25) and right hand clearance light connector P89 (26) through tube (27). (15) Install terminal lug TL20 (25) on tool box (1) with lockwasher (28) and nut (29). (16) Connect clearance light connector P89 (26) to connector 489 (30). NOTE Three center electrical connectors are removed the same. Left hand center connector shown. Refer to Table 16-1. M1089 Rear Clearance Marker Light Connectors for combinations of terminal lugs and connectors on each marker light. (17) Route clearance light connector 489 (31) and terminal lug TL7 (32) through tool box (1). (18) Install terminal lugs TL30 (33) and TL7 (32) on clearance light (34) with lockwasher (35) and nut (36). (19) Connect clearance light connector 489 (31) to connector P54 (37). (20) Perform steps (17) through (19) on remaining clearance lights. 16-180