TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1249 of 1558
TM 9-2320-366-20-4 NOTE • Left and right electrical connector brackets are installed the same way. Left side shown. • Step (6) and (7) requires the aid of an assistant. (6) Position electrical connector brackets (11) on tool box (1) with four washers (12), two screws (13), and self-locking nuts (14). (7) Tighten two self-locking nuts (14) to 8-10 lb-ft (11-13 N·m). (8) Perform steps (6) and (7) on right side electrical connector bracket. NOTE All four reflectors are installed the same way. One shown. (9) Install reflector (15) on tool box (1) with two lockwashers (16), screws (17), and self-locking nuts (18). (10) Perform step (9) on remaining reflectors. NOTE All five clearance lights are installed the same way. One shown. (11) Install clearance light (19) on tool box (1) with four lockwashers (20), screws (21), and self-locking nuts (22). (12) Install cover (23) in tool box (1) with two screws (24). (13) Perform steps (11) and (12) on remaining clearance lights. 16-179