TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1247 of 1558
TM 9-2320-366-20-4 (20) Install tool box lid (35) in two hinges (27) with four lockwashers (39) and self-locking nuts (40). NOTE Step (21) requires the aid of an assistant. (21) Position stay (41) on tool box (9) with four screws (42), washers (43), and self-locking nuts (44). (22) Tighten four screws (42) to 8-10 lb-ft (11-13 N·m). (23) Close tool box lid (35). d. Installation. WARNING Rear tool box weighs approximately 75 lbs (34 kgs) empty. Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Both tool boxes are installed the same way. Rear tool box shown. • Steps (1) and (2) require the aid of an assistant. (1) Position tool box (1) on support structure (2). Change 1 16-177