TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1246 of 1558
TM 9-2320-366-20-4 16-23. M1089 TOOL BOX REPLACEMENT/REPAIR (CONT) (15) Install four hinges (27) on tool box (9) with four washers (28) and self-locking nuts (29). NOTE All tool box lids, stays, and hasps are installed the same way. Left rear shown. (16) Position four hasps (30) on tool box (9) with 16 screws (31), washers (32), and self-locking nuts (33). (17) Tighten 16 self-locking nuts (33) to 12-24 lb-in. (1-3 N·m). (18) Position two brackets (34) on tool box lid (35) with four screws (36), washers (37), and self-locking nuts (38). (19) Tighten four self-locking nuts to 12-24 lb-in. (1-3 N·m). 16-176