TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1244 of 1558
TM 9-2320-366-20-4 16-23. M1089 TOOL BOX REPLACEMENT/REPAIR (CONT) NOTE Left and right tubes are removed the same way. Right tube shown. (12) Remove two self-locking nuts (31), four washers (32), two screws (33), tube (34), and two clamps (35) from tool box (6). Discard self-locking nuts. (13) Remove nonmetallic bumper (36) from tool box (6). Discard nonmetallic bumper. NOTE Perform steps (14) and (15) on front tool box. (14) Remove self-locking nut (37) and screw (38) from bracket (39). Discard self-locking nut. (15) Remove self-locking nut (40), screw (41), washer (42), and bracket (39) from front tool box (43). Discard self- locking nut. c. Assembly. NOTE Perform steps (1) and (2) on front tool box. (1) Position bracket (1) on front tool box (2) with screw (3), washer (4) and self-locking nut (5). (2) Tighten self-locking nut (5) to 33-37 lb-ft (45-50 N·m). (3) Position screw (6) in bracket (1) with self-locking nut (7). (4) Tighten self-locking nut (7) to 17-19 lb-ft (23-26 N·m). 16-174 Change 1