TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1237 of 1558
TM 9-2320-366-20-4 NOTE Tag electrical connections prior to disconnecting. (2) Disconnect connector 489 (5) from left hand clearance light connector P86 (6). (3) Remove nut (7), lockwasher (8), and terminal lug TL16 (9) from tool box (10). Discard lockwasher. (4) Remove clearance light connector P86 (6) and terminal lug TL16 (9) from tube (11). NOTE Three center electrical connectors are removed the same. Left hand center connector shown. Refer to Table 16-1. M1089 Rear Clearance Marker Light Connectors for combinations of terminal lugs and connectors on each marker light. (5) Disconnect connector 489 (5) from left hand center clearance light connector P54 (12). (6) Remove nut (13), lockwasher (14), and terminal lugs TL30 (15) and TL7 (16) from left hand clearance light (17). Discard lockwasher. Table 16-1. M1089 Rear Clearance Marker Light Connectors LIGHT TERMINAL LUGS ELECTRICAL CONNECTION Center TL7/TL31 P56 Right Hand TL32 P58 (7) Remove clearance light connectors P54 (12) and terminal lug TL7 (16) from tool box (10). (8) Perform steps (5) through (7) on remaining clearance lights. 16-167