TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1236 of 1558
TM 9-2320-366-20-4 16-23. M1089 TOOL BOX REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Tools removed from tool boxes (TM 9-2320-366-10- 1). Placards removed (para 2-39). M1089 ladder lowered (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Sling, Cargo (Item 69, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Nut, Self-Locking (Item 147, Appendix G) Lockwasher (5) (Item 99, Appendix G) Materials/Parts (Cont) Nut, Self-Locking (20) (Item 164, Appendix G) Bumper Nonmetallic (4) (Item 4, Appendix G) Nut, Self-Locking (14) (Item 135, Appendix G) Lockwasher (20) (Item 111, Appendix G) Nut, Self-Locking (8) (Item 165, Appendix G) Lockwasher (8) (Item 112, Appendix G) Rubber Strip (Item 260, Appendix G) Nut, Self-Locking (14) (Item 133, Appendix G) Nut, Self-Locking (8) (Item 136, Appendix G) Nut, Self-Locking (12) (Item 150, Appendix G) Nut, Self-Locking (24) (Item 149, Appendix G) Nut, Self-Locking (2) (Item 176, Appendix G) Grommet, Nonmetallic (2) (Item 48, Appendix G) Grommet, Nonmetallic (2) (Item 50, Appendix G) Personnel Required (2) a. Removal. WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE • Step (1) requires the aid of an assistant. • Front and rear tool boxes are removed the same way. Rear tool box shown. (1) Remove self-locking nut (1), two washers (2), and screw (3) from ladder support hand rail bracket (4). Discard self-locking nut. 16-166