TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1232 of 1558
TM 9-2320-366-20-4 16-22. M1090/M1094 LADDER, BRACKETS, AND LATCH REPLACEMENT/REPAIR/ ADJUSTMENT (CONT) f. Rear Brackets Installation. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Perform steps (1) through (7) on left rear bracket. (1) Apply sealing compound to threads of four screws (1) and two screws (2). (2) Position two wear pads (3) on rear bracket (4) with four screws (1), washers (5), and self-locking nuts (6). (3) Tighten four self-locking nuts (6) to 24-30 lb-in. (3 N·m). (4) Install wear pad (7) on rear bracket (4) with two screws (2). (5) Apply sealing compound to threads of three screws (8). (6) Position rear bracket (4) on vehicle with three screws (8). (7) Tighten three screws (8) to 20-25 lb-ft (27-34 N·m). 16-162