TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1225 of 1558
TM 9-2320-366-20-4 16-22. M1090/M1094 LADDER, BRACKETS, AND LATCH REPLACEMENT/REPAIR/ ADJUSTMENT This task covers: a. Ladder Disassembly b. Ladder Assembly c. Front Bracket Removal d. Front Bracket Installation e. Rear Brackets Removal f. Rear Brackets Installation g. Latch Adjustment h. Follow-On Maintenance INITIAL SETUP Equipment Conditions Ladder removed (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Sealing Compound (Item 60, Appendix D) Rivet, Blind (4) (Front Bracket) (Item 247, Appendix G) Rivet, Blind (2) (Front Bracket) (Item 249, Appendix G) Materials/Parts (Cont) Rivet, Blind (3) (Front Bracket) (Item 251, Appendix G) Nut, Self-Locking (4) (Front Bracket) (Item 151, Appendix G) Rivet, Blind (18) (Ladder) (Item 243, Appendix G) Rivet, Blind (2) (Right Rear Bracket) (Item 250, Appendix G) Rivet, Blind (2) (Right Rear Bracket) (Item 253, Appendix G) Rivet, Blind (4) (Right Rear Bracket) (Item 247, Appendix G) Nut, Self-Locking (Right Rear Bracket) (Item 150, Appendix G) Nut, Self-Locking (4) (Left Rear Bracket) (Item 160, Appendix G) a. Ladder Disassembly. WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (1) Remove six rivets (1) and two wear pads (2) from ladder (3). 16-155