TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1222 of 1558
TM 9-2320-366-20-4 16-152 Change 2 16-21. M1090/M1094 TAILGATE ASSEMBLY REPLACEMENT This task covers: a.Removal b.Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Hinges opened (TM 9-2320-366-10-1). Tools and Special Tools Drill, Portable, Electric (Item 7, Appendix C) Drill, Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Tools and Special Tools (Cont) Tool Kit, Genl Mech (Item 46, Appendix C) Sling, Cargo (Item 69, Appendix C) Materials/Parts Rivet, Blind (2) (Item 246, Appendix G) Personnel Required (2) a. Removal. (1) Remove two pins (1) from hitch pins (2). (2) Remove two hitch pins (2) from tailgate (3). (3) Perform steps (1) and (2) on left side of tailgate (3). WARNING Tailgate assembly weighs approximately 270 lbs (123 Kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Left and right side pins are removed the same way. Right side shown.