TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1220 of 1558
TM 9-2320-366-20-4 16-20. M1090/M1094 GUIDE POST ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) a. Removal. NOTE Left and right side cable guides are replaced the same way. Right side shown. (1) Remove lynch pin (1) from top pin (2). (2) Remove top pin (2) from guide post (3). (3) Loosen screw (4). (4) Remove guide post (3) from dump bed (5). 16-150