TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1213 of 1558
TM 9-2320-366-20-4 16-18. CAB STORAGE BOX REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Materials/Parts Adhesive (Item 3, Appendix D) Pin, Cotter (Item 236, Appendix G) Grommet, Nonmetallic (Item 49, Appendix G) Bumper, Rubber (12) (Item 5, Appendix G) Channel, Rubber (Item 7, Appendix G) a. Removal. NOTE Left and right storage boxes are removed the same way. Left storage box shown. (1) Open storage box cover (1). (2) Remove six screws (2) and washers (3) from storage box (4). (3) Remove storage box (4) from cab floor (5). b. Disassembly. (1) Remove six nuts (1), washers (2), screws (3), and storage box cover (4) from storage box (5). (2) Remove two nuts (6), screws (7) and clamp (8) from storage box cover (4). 16-143