TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1208 of 1558
TM 9-2320-366-20-4 16-17. TOOL BOX REPLACEMENT/REPAIR (CONT) (4) Remove two self-locking nuts (10), screws (11), washers (12), and tool box (13) from front lifting beam (14). Discard self-locking nuts. (5) Remove two screws (15), washers (16), and tool box (13) from backup hydraulic pump (4). b. Disassembly. WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. NOTE Tool box doors may be installed with rivets or screws and nuts. Tool box door with rivets shown. (1) Remove five rivets (1) and tool box door (2) from hinge (3). (2) Remove five rivets (4) and hinge (3) from tool box (5). 16-138 Change 1