TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1207 of 1558
TM 9-2320-366-20-4 16-17. TOOL BOX REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Spare tire lowered (TM 9-2320-366-10-2). Tools removed from tool box (TM 9-2320-366-10-1). Hydraulic manifold removed (para 19-4). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Screwdriver Attachment, Socket Wrench (Item 62, Appendix B) Drill, Electric, Portable (Item 7, Appendix C) Tools and Special Tools (Cont) Drill Set, Twist (Item 6, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Latch, Bail Head (Item 67, Appendix G) Seal, Nonmetallic (Item 269, Appendix G) Nut, Self-Locking (8) (Item 155, Appendix G) Nut, Self-Locking (2) (Item 156, Appendix G) Personnel Required (2) a. Removal. (1) Remove two screws (1), washers (2), and cover (3) from backup hydraulic pump (4). (2) Remove four self-locking nuts (5) and screws (6) from spare tire retainer assembly (7). Discard self-locking nuts. (3) Remove four self-locking nuts (8) and screws (9) from spare tire retainer assembly (7). Discard self-locking nuts. Change 1 16-137