TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1190 of 1558
TM 9-2320-366-20-4 16-13. CAB FLOOR COVERING AND DOOR SEAL REPLACEMENT (CONT) c. Left Cab Floor Covering Removal. (1) Remove two screws (1) and washers (2) from accelerator pedal (3). (2) Position accelerator pedal (3) to allow removal of left floor covering (4). (3) Remove left floor covering (4) from cab floor (5). (4) Remove four screws (6), washers (7), and molding (8) from cab floor (5). d. Left Cab Floor Covering Installation. (1) Position molding (1) on cab floor (2) with four washers (3) and screws (4). (2) Tighten four screws (4) to 22-26 lb-in. (2-3 N·m). (3) Install left floor covering (1) on cab floor (2). (4) Install two washers (3) and screws (4) in accelerator pedal (5). (5) Tighten two screws (4) to 72-84 lb-in. (8-9 N·m). e. Center Cab Floor Covering Removal. Remove center floor covering (1) from cab floor (2). 16-122