TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1186 of 1558
TM 9-2320-366-20-4 16-12. CAB STEP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Windshield washer reservoir and pump removed (for left side) (para 18-2). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Nut, Self-Locking (10) (Item 167, Appendix G) Grommet, Nonmetallic (Item 54, Appendix G) Receptacle (Item 241, Appendix G) Seal, Nonmetallic (Item 269, Appendix G) a. Removal. NOTE Left and right cab steps are removed the same way. Left cab step shown. (1) Open cab step tread (1) on cab step (2). (2) Remove four self-locking nuts (3), eight washers (4), and four screws (5) from cab step (2). Discard self-locking nuts. (3) Remove four self-locking nuts (6), eight washers (7), four screws (8), and cab step (2) from fender (9). Discard self-locking nuts. 16-118