TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1184 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) ag. M1083/M1084/M1085/M1086 Splash Guard Removal. NOTE Right and left splash guards are removed the same way. Right side shown. (1) Remove three self-locking nuts (1), screws (2), brace (3), and splash guard (4) from bracket (5). Discard self- locking nuts. (2) Remove splash guard (4) from brace (3). (3) Remove two self-locking nuts (6), screws (7), and bracket (5) from cargo bed (8). Discard self-locking nuts. ah. M1083/M1084/M1085/M1086 Splash Guard Installation. NOTE Right and left splash guards are installed the same way. Right side shown. (1) Position bracket (1) on cargo bed (2) with two screws (3) and self-locking nuts (4). (2) Tighten two self-locking nuts (4) to 25-31 lb-ft (34-42 N·m). (3) Install splash guard (5) in brace (6). (4) Install splash guard (5) and brace (6) on bracket (1) with three screws (7) and self-locking nuts (8). 16-116