TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1183 of 1558
TM 9-2320-366-20-4 af. M1090/M1094 Splash Guard Installation. NOTE Right and left splash guards are installed the same way. Right side shown. (1) Position bracket (1) on dump body (2) with two screws (3) and self-locking nuts (4). (2) Tighten two self-locking nuts (4) to 25-31 lb-ft (34-42 N·m). NOTE Perform steps (3) and (4) on right side bracket. (3) Position screw (5) and self-locking nut (6) in bracket (1). (4) Tighten self-locking nut (6) to 18-22 lb-ft (24-30 N·m). (5) Install splash guard (7) in brace (8). (6) Install splash guard (7) and brace (8) on bracket (1) with three screws (9) and self-locking nuts (10). 16-115