TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1182 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) NOTE Step (2) requires the aid of an assistant. (2) Install engine splash guard (5) on cab (2) with 14 washers (6) and rivets (7). (3) Lower cab (TM 9-2320-366-10-1). ae. M1090/M1094 Splash Guard Removal. NOTE Right and left splash guards are removed the same way. Right side shown. (1) Remove three self-locking nuts (1), screws (2), brace (3), and splash guard (4) from bracket (5). Discard self- locking nuts. (2) Remove splash guard (4) from brace (3). NOTE Perform step (3) on right side bracket. (3) Remove self-locking nut (6) and screw (7) from bracket (5). Discard self-locking nut. (4) Remove two self-locking nuts (8), screws (9), and bracket (5) from dump body (10). Discard self-locking nuts. 16-114