TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1174 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) y. M1090/M1094 Rear Fender and Bracket Removal. NOTE Left and right rear fenders and brackets are removed the same way. Right side shown. (1) Remove self-locking nut (1), washer (2), resilient mount (3), hook (4), and washer (5) from rear fender (6). Discard self-locking nut. (2) Remove nut (7) from hook (4). (3) Remove two self-locking nuts (8), washers (9), resilient mounts (10), and screws (11) from rear fender (6). Discard self-locking nuts. (4) Remove two self-locking nuts (12), washers (13), screws (14), bracket (15), and rear fender (6) from support bracket (16). Discard self-locking nuts. (5) Remove two self-locking nuts (17), washers (18), screws (19), washers (20), bracket (15), and two resilient mounts (21) from rear fender (6). Discard self-locking nuts. (6) Remove nut (22), washer (23), screw (24), and clamp (25) from bracket (26). (7) Remove two nuts (27), washers (28), screws (29), and bracket (26) from taillight carrier (30). 16-106