TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1172 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) v. M1089 Rear Fender Installation. NOTE • Left and right rear fenders are installed the same way. Right side shown. • Step (1) requires the aid of an assistant. (1) Position lug (1) and rear fender (2) on stiffleg (3) with four washers (4) and screws (5). (2) Tighten four screws (5) to 152-168 lb-ft (206-228 N·m). NOTE Step (3) requires the aid of an assistant. (3) Position brace plate (6) on taillight carrier (7) with two resilient mounts (8), screws (9), washers (10), and self- locking nuts (11). (4) Tighten two self-locking nuts (11) to 18-22 lb-ft (24-30 N·m). (5) Position brace plate (6) on rear fender (2) with four washers (12), two resilient mounts (13), screws (14), and self-locking nuts (15). (6) Tighten two self-locking nuts (15) to 18-22 lb-ft (24-30 N·m). 16-104