TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1170 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) s. M1089 Rear Splash Guard Removal. NOTE Left and right rear splash guards are removed the same way. Right side shown. (1) Remove two pinlocks (1) and rear splash guard (2) from sandshoe (3). (2) Remove five self-locking nuts (4), ten washers (5), five screws (6), and two plates (7) from rear splash guard (2). Discard self-locking nuts. t. M1089 Rear Splash Guard Installation. NOTE Left and right rear splash guards are installed the same way. Right side shown. (1) Position two plates (1) on rear splash guard (2) with five screws (3), ten washers (4), and five self-locking nuts (5). (2) Tighten five self-locking nuts (5) to 18-22 lb-ft (24-30 N·m). (3) Install rear splash guard (2) on sandshoe (6) with two pinlocks (7). 16-102