TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1169 of 1558
TM 9-2320-366-20-4 (3) Remove two self-locking nuts (10), washers (11), screws (12), rear fender (9), and two resilient mounts (13) from platform (3). Discard self-locking nuts. r. M1088 Rear Fender Installation. NOTE Left and right rear fenders are installed the same way. Right side shown. (1) Position rear fender (1) on platform (2) with two resilient mounts (3), screws (4), washers (5), and self-locking nuts (6). (2) Tighten two self-locking nuts (6) to 18-22 lb-ft (24-30 N·m). (3) Position two brackets (7) on rear fender (1) with two resilient mounts (8), screws (9), washers (10), and self- locking nuts (11). (4) Position two screws (12) and self-locking nuts (13) in platform (2). (5) Tighten self-locking nuts (11 and 13) to 18-22 lb-ft (24- 30 N·m). 16-101