TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1167 of 1558
TM 9-2320-366-20-4 (3) Remove self-locking nut (9), washer (10), and screw (11) from bracket (7). Discard self-locking nut. (4) Remove bracket (7) from mounting bracket (12). (5) Remove two self-locking nuts (13), screws (14), and mounting bracket (12) from bumper (15). Discard self- locking nuts. p. M1088 Rear Splash Guard and Mounting Bracket Installation. NOTE Left and right rear splash guards and mounting brackets are installed the same way. Left side shown. (1) Position mounting bracket (1) on bumper (2) with two screws (3) and self-locking nuts (4). (2) Tighten two self-locking nuts (4) to 149-183 lb-ft (202- 248 N·m). 16-99