TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1166 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) (6) Position rear fender (5) on cargo bed (11) with two washers (12), screws (13), and self-locking nuts (14). (7) Tighten two self-locking nuts (14) to 18-22 lb-ft (24-30 N·m). (8) Position brackets (15 and 16) on cargo bed (11) with washer (17), screw (18), washer (19), and nut (20). (9) Tighten nut (20) to 18-22 lb-ft (24-30 N·m). o. M1088 Rear Splash Guard and Mounting Bracket Removal. NOTE Left and right rear splash guards and mounting brackets are removed the same way. Right side shown. (1) Remove three self-locking nuts (1), two screws (2), hook (3), rear splash guard (4), plate (5), and washer (6) from bracket (7). Discard self-locking nuts. (2) Remove nut (8) from hook (3). 16-98