TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1165 of 1558
TM 9-2320-366-20-4 (3) Remove two nuts (12), washers (13), resilient mounts (14), screws (15), and bracket (16) from rear fender (11). (4) Remove nut (17), two washers (18), and hook (19) from rear fender (11). (5) Remove nut (20) from hook (19). n. M1085/M1086 Rear Fender Installation. NOTE Left and right rear fenders are installed the same way. Right side shown. (1) Install nut (1) on hook (2) to bottom of threads. (2) Position hook (2), two washers (3), and nut (4) on rear fender (5). (3) Tighten nut (4) to 18-22 lb-ft (24-30 N·m). (4) Position bracket (6) on rear fender (5) with two screws (7), resilient mounts (8), washers (9), and nuts (10). (5) Tighten two nuts (10) to 18-22 lb-ft (24-30 N·m). 16-97