TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1164 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) l. M1085/M1086 Rear Splash Guard Installation. NOTE Left and right rear splash guards are installed the same way. Right side shown. (1) Position rear splash guard (1) and plate (2) between rear fender (3) and brackets (4 and 5) with three washers (6), screws (7), washers (8), and self-locking nuts (9). (2) Tighten three self-locking nuts (9) to 18-22 lb-ft (24-30 N·m). m. M1085/M1086 Rear Fender Removal. NOTE Left and right rear fenders are removed the same way. Right side shown. (1) Remove nut (1), washer (2), screw (3), washer (4), and brackets (5 and 6) from cargo bed (7). (2) Remove two self-locking nuts (8), screws (9), washers (10), and rear fender (11) from cargo bed (7). Discard self-locking nuts. 16-96