TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1160 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (3) Remove three rivets (5), washers (6), and engine splash guard (7) from cab (4). d. Engine Splash Guard Installation. NOTE Left and right engine splash guards are installed the same way. Left side shown. (1) Install engine splash guard (1) on cab (2) with three washers (3) and rivets (4). NOTE Step (2) requires the aid of an assistant. (2) Install engine splash guard (5) on cab (2) with 14 washers (6) and rivets (7). (3) Lower cab (TM 9-2320-366-10-1). 16-92