TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1159 of 1558
TM 9-2320-366-20-4 NOTE Perform steps (12) through (14) on left side. (12) Position lockwasher (18) and terminal lug TL94 (19) on front fender (3) with washer (20), screw (21), washer (22), and self-locking nut (23). (13) Position three screws (24), six washers (25), and three self-locking nuts (26) in front fender (3). (14) Tighten self-locking nut (23) and three self-locking nuts (26) to 18-22 lb-ft (24-30 N·m). NOTE Perform step (15) on right side. (15) Close cab step tread (27) on cab step (28). (16) Lower cab (TM 9-2320-366-10-1). c. Engine Splash Guard Removal. (1) Raise cab (TM 9-2320-366-10-1). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. NOTE Left and right engine splash guards are removed the same way. Left side shown. (2) Remove 14 rivets (1), washers (2), and engine splash guard (3) from cab (4). 16-91