TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1158 of 1558
TM 9-2320-366-20-4 16-11. FENDER AND SPLASH GUARD REPLACEMENT (CONT) NOTE Step (4) requires the aid of an assistant. (4) Position front fender (3) on cab (7) with 12 washers (8) and screws (9). (5) Tighten 12 screws (9) to 18-22 lb-ft (24-30 N·m). (6) Position six washers (10) and screws (11) in front fender (3). (7) Tighten six screws (11) to 18-22 lb-ft (24-30 N·m). (8) Position three screws (12), six washers (13), and three self-locking nuts (14) in front fender (3). (9) Tighten three self-locking nuts (14) to 18-22 lb-ft (24-30 N·m). NOTE Perform steps (10) and (11) on right side. (10) Position four screws (15) eight washers (16) and four self-locking nuts (17) in front fender (3). (11) Tighten four self-locking nuts (17) to 18-22 lb-ft (24-30 N·m). 16-90