TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1153 of 1558
TM 9-2320-366-20-4 k. Upper Bracket Removal. (1) Remove three self-locking nuts (1), six washers (2), guard support (3), and three screws (4) from splash guard (5). Discard self-locking nuts. (2) Remove self-locking nut (6), two washers (7), screws (8), and guard support (9) from vehicle. Discard self-locking nuts. l. Upper Bracket Installation. (1) Position guard support (1) on vehicle with screw (2), two washers (3), and self-locking nut (4). (2) Tighten self-locking nut (4) to 88-106 lb-ft (119-144 N·m). (3) Install guard support (5) and splash guard (6) on vehicle with three screws (7), six washers (8), and three self- locking nuts (9). End of Task. 16-85