TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1146 of 1558
TM 9-2320-366-20-4 16-10. M1089 UNDERPLATE, SPLASH GUARD, AND BRACKETS REPLACEMENT This task covers: a. Underplate Removal b. Underplate Installation c. Left Front/Left Rear Bracket Removal d. Left Front/Left Rear Bracket Installation e. Right Front Bracket Removal f. Right Front Bracket Installation g. Right Rear Bracket Removal h. Right Rear Bracket Installation i. Splash Guard Removal j. Splash Guard Installation k. Upper Bracket Removal l. Upper Bracket Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Nut, Self-Locking (6) (Item 134, Appendix G) Nut, Self-Locking (3) (Item 148, Appendix G) Lockwasher (Item 108, Appendix G) Lockwasher (Item 109, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Underplate Removal. (1) Remove three self-locking nuts (1), six washers (2), three screws (3), and guard support (4) from underplate (5). Discard self-locking nuts. 16-78