TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 1144 of 1558

TM 9-2320-366-20-4 16-76 Change 2 16-9. AIR SPRING AND BRACKET REPLACEMENT (CONT) (13) Remove rear cab support assembly (11) from spare tire retainer (17). NOTE (14) Measure distance from top surface of mounting bracket (1) to top edge of air spring (10). (15) Position stoneguard (18) on air spring (10) with two washers (19) and screws (20). (16) Position washer (21) and screw (22) in stoneguard (18). (17) Tighten two screws (20) and screw (22) to 48-72 lb- in. (5-8 Nm). Dimension measured in step (14) should be 11.75-11.94 in. (298.5-303.5 mm). If measurement recorded in step (14) is not within limits, perform cab leveling valve adjustment (para 16-8) prior to installing stoneguard.