TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 1142 of 1558

TM 9-2320-366-20-4 16-9. AIR SPRING AND BRACKET REPLACEMENT (CONT) (10) Remove three self-locking nuts (18), washers (19), and screws (20) from mounting bracket (2). Discard self- locking nuts. (11) Remove self-locking nut (21), washer (22), screw (23), and mounting bracket (2) from left frame rail (24). Discard self-locking nut. d. Left Air Spring and Bracket Installation. (1) Position mounting bracket (1) on left frame rail (2) with screw (3), washer (4), and self-locking nut (5). (2) Position three screws (6), washers (7), and self-locking nuts (8) in mounting bracket (1). NOTE Step (2.1 and 3) requires the aid of an assistant. (2.1) Rotate mounting bracket (1) counterclockwise to the maximum angle permitted by mounting hole clearance. (3) Tighten self-locking nut (5) and three self-locking nuts (8) to 58-76 lb-ft (79-103 N·m). 16-74 Change 1