TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1136 of 1558
TM 9-2320-366-20-4 16-9. AIR SPRING AND BRACKET REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply antiseize compound to threads of pipe fitting (6) and check valve (6.1). (3.1) Apply antiseize compound to one end of 90-degree fitting (6.2). (4) Install pipe fitting (6) in air spring (7). (4.1) Install tee fitting (7.1) on pipe fitting (6). (4.2) Install check valve (6.1) in tee fitting (7.1). (4.3) Install 90-degree fitting (6.2) in tee fitting (7.1). (5) Position air spring (7) on rear cab support assembly (8) with four screws (9) and self-locking nuts (10). NOTE Step (6) requires the aid of an assistant. (6) Tighten four self-locking nuts (10) to 45-61 lb-ft (61-83 N·m). (7) Position four screws (11) and self-locking nuts (12) in air spring (7). (8) Connect air hoses (13 and 13.1) to check valve (6.1) and 90-degree fitting (6.2). (9) Lower cab (TM 9-2320-366-10-1). (10) Inflate cab air springs (TM 9-2320-366-10-1). NOTE Step (11) requires the aid of an assistant. (11) Tighten four self-locking nuts (12) to 45-61 lb-ft (61-83 N·m). 16-70 Change 1