TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1127 of 1558
TM 9-2320-366-20-4 (6) Position cab leveling valve linkage (5) on rear cab support (1) with and self-locking nut (6). (7) Tighten self-locking nut (6) to 84-108 lb-in. (9-12 N·m). (8) Install three cable clamps (7) on cab support (1) with screws (8). (9) Position cab hydraulic latch (9) on rear cab support (1) with matchmarks aligned. (10) Position four screws (10), washers (11), and self-locking nuts (12) in cab hydraulic latch (9). (11) Tighten four self-locking nuts (12) to 34-44 lb-ft (46-60 N·m). NOTE Loosen screws only enough that latches can be moved with some resistance. (12) Loosen four screws (13) in two cab latches (14). Change 1 16-61