TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1125 of 1558
TM 9-2320-366-20-4 b. Installation. NOTE Step (1) requires the aid of an assistant. (1) Position rear cab support (1) on vehicle. NOTE • Left and right sides of rear cab support are installed the same way. Right side shown. • Order rubber plugs PN 12420305-027 if vehicle was not originally equipped with them. (2) Install rubber plug (2) on rear cab support (1). (3) Position four screws (3) and self-locking nuts (4) in rear cab support (1). NOTE Step (4) requires the aid of an assistant. (4) Tighten four self-locking nuts (4) to 45-61 lb-ft (61-83 N·m). (5) Perform steps (2) through (4) on left side of rear cab support. Change 1 16-60.1/(16-60.2 Blank)