TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1121 of 1558
TM 9-2320-366-20-4 (5) Loosen three screws (5) on strike catch (6) and adjust so catch is centered in latch assembly (7) slot, as shown. (6) Tighten three screws (5) to 70-85 lb-ft (8-10 N·m). (7) Open and close door (1) to ensure correct operation. NOTE Ensure door lining fits inside of strip at bottom of door. (8) Position door lining (8) on door (1). (9) Install 12 rivets (9) in door lining (8). (10) Position latch (10) on door (1) with two screws (11). (11) Tighten two screws (11) to 65-121 lb-in. (10-14 N·m). (12) Install knob (12) on lock stud (13). 16-57