TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1120 of 1558
TM 9-2320-366-20-4 16-56 Change 2 16-6. M1093/M1094 DOOR REPAIR/ADJUSTMENT (CONT) (12) Install door arrestor assembly (14) on cab with washer (15), two spring washers (16), and screw (17). (13) Install door arrestor assembly (14) on bottom of door (7) with two screws (18). i. Door Adjustment. (1) Support door (1) and loosen six screws (2) on bottom hinge (3) and top hinge (4). (2) Adjust door (1) so that gap between door (1) and cab is approximately equal all around. (3) Open, close, and open door (1) to ensure correct operation. (4) Tighten six screws (2) on top hinge (4) and bottom hinge (3) to 22-26 lb-ft (30-35 N•m). NOTE Steps (1) through (4) require the aid of an assistant. Loosen door hinge screws only enough to allow small adjusting movements of door. NOTE Hold door in place while screws are tightened.