TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1111 of 1558
TM 9-2320-366-20-4 NOTE Ensure door lining fits inside of strip at bottom of door. (16) Position door lining (17) on door (5). (17) Install 12 rivets (18) in door lining (17). (18) Position latch (19) on door (5) with two screws (20). (19) Tighten two screws (20) to 65-121 lb-in. (10-14 N·m). (20) Install knob (21) on lock stud (22). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (21) Apply sealing compound to threads of screw (23). (22) Position collar (24) and window crank (25) on window regulator (26) with screw (23). (23) Tighten screw (23) to 50-55 lb-in. (6 N·m). (24) Install cover (27) on window crank (25). Change 1 16-49