TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1095 of 1558
TM 9-2320-366-20-4 Change 2 16-37 16-6. M1093/M1094 DOOR REPAIR/ADJUSTMENT This task covers: a.Window and Window Regulator Removal b.Window and Window Regulator Installation c. Door Latch/Lock Disassembly d.Door Latch/Lock Assembly e.Door Upper-Half Removal f. Door Upper-Half Installation g. Door Lower-Half Removal h. Door Lower-Half Installation i. Door Adjustment j. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Marker light removed (para 7-38). Upper door-half removed (for lower door-half removal). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Screwdriver Attachment, Socket Wrench (Item 64, Appendix B) Socket Set, Socket Wrench (Item 36, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Tools and Special Tools (Cont) Drill, Twist (Item 8, Appendix C) Goggles, Industrial (Item 15, Appendix B) Materials/Parts Sealing Compound (Item 60, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Seal, Nonmetallic (Item 318, Appendix C) Soap, Laundry (Item 63, Appendix D) Rivet, Compression (12) (Item 259, Appendix G) Rivet (6) (P/N 2060-M4W2) Personnel Required (2) a. Window and Window Regulator Removal. (1) Remove cover (1) from door handle (2). (2) Remove screw (3), door handle (2), and washer (4) from door (5). (3) Remove four screws (6) and handle (7) from door (5). NOTE If complete repair of the door is required, it will be necessary to notify DS maintenance to replace the door side window at the completion of Unit level repairs. Left and right windows and window regulators are removed the same way. Right side shown.