TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1093 of 1558
TM 9-2320-366-20-4 (5) Loosen three screws (5) on latch assembly (6) and adjust so latch assembly is centered on strike catch (7). (6) Tighten three screws (5) to 70-85 lb-in. (8-10 N·m). (7) Open and close door (1) to ensure correct operation. (8) Install door lining (8) on interior side of door (1) with ten rivets (9). (9) Install knob (10) on lock stud (11). WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (10) Apply sealing compound to threads of screw (12). (11) Position collar (13) and window crank (14) on window regulator (15) with screw (12). (12) Tighten screw (12) to 50-55 lb-in. (6 N·m). (13) Install cover (16) on window crank (14). 16-35