Sign up to sell your inventory with NSN Lookup

TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download

Page 1092 of 1558

TM 9-2320-366-20-4 16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1093/M1094) (CONT) (15) Position mirror assembly (19) on door (7) with four screws (20). (16) Tighten four screws (20) to 84-96 lb-in. (9-11 N·m). g. Door Adjustment. NOTE • Steps (1) and (2) require the aid of an assistant. • Loosen door hinge screws only enough to allow small adjusting movements of door. (1) Support door (1) and loosen six screws (2) on bottom hinge (3) and top hinge (4). (2) Adjust door (1) so that gap between door (1) and cab is approximately equal all around. (3) Open, close, and open door (1) to ensure correct operation. (4) Tighten six screws (2) on top hinge (4) and bottom hinge (3) to 22-26 lb-ft (30-35 N·m). 16-34