TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 108 of 1558
TM 9-2320-366-20-4 7-86. M1084/M1086 BOOM DOWN SOLENOID CABLE REPLACEMENT (CONT) b. Installation. (1) Position boom down solenoid cable (1) through clamp (2). (2) Position boom down solenoid cable (1) through compression nut (3), washer (4), and connector (5). (3) Install washer (4) and compression nut (3) on connector (5). (4) Tighten nut (6) on clamp (2). (5) Install quick disconnect terminal (7) on two black wires (8). (6) Install terminal lug (9) on white wire (10). (7) Install quick disconnect terminal (7) on ground strip (11) position 1. (8) Install terminal lug (9) on terminal block (12) position 22 with screw (13). (9) Apply varnish to quick disconnect terminal (7) and terminal lug (9). 7-436