TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1072 of 1558
TM 9-2320-366-20-4 16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1093/M1094) This task covers: a. Window and Window Regulator Removal b. Window and Window Regulator Installation c. Door Latch/Lock Disassembly d. Door Latch/Lock Assembly e. Door Removal f. Door Installation g. Door Adjustment h. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Marker light removed (para 7-38). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Screwdriver Attachment, Socket Wrench (Item 64, Appendix B) Socket Set, Socket Wrench (Item 36, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill, Twist (Item 8, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B) Materials/Parts Soap, Laundry (Item 63, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Sealing Compound (Item 60, Appendix D) Rivet, Compression (10) (Item 259, Appendix G) Seal, Nonmetallic (Item 270, Appendix G) Rivet (Item 243.2, Appendix G) Personnel Required (2) NOTE If complete repair of the door is required, it will be necessary to notify DS maintenance to replace the door side window at the completion of Unit level repairs. a. Window and Window Regulator Removal. NOTE Left and right windows and window reg-ulators are removed the same way. Right side shown. (1) Remove cover (1) from door handle (2). (2) Remove screw (3), door handle (2), and washer (4) from door (5). (3) Remove four screws (6) and door handle (7) from door (5). 16-14 Change 1