TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1068 of 1558
TM 9-2320-366-20-4 16-4. M1093/M1094 CAB ROOF REPLACEMENT (CONT) (2) Position five centering cones (3) on cab roof (2) with five screws (4) (3) Position 11 centering cups (5) on cab roof (2) with 11 screws (6). (4) Tighten five screws (4) and 11 screws (6) to 62-124 lb- in. (7-14 N·m). CAUTION Begin inside and outside rubber strip installation on opposite sides of each other. Failure to comply may result in damage to equipment. (5) Install inside rubber strip (7) on roof hatch (8). (6) Install outside rubber strip (8.1) on roof hatch (8). (7) Install 6 in. (15.2 cm) back-up rubber strips (8.2) centered on joints of inside and outside rubber strips (7 and 8.1). NOTE Steps (8) through (11) require the aid of an assistant. (8) Position roof hatch (8) on cab roof (2) with matchmarks aligned. (8.1) Position 12 washers (8.3) and screws (9) in roof hatch (8). (8.2) Tighten 12 screws (9) to 35-41 lb-ft (48-56 N·m). 16-10 Change 1