TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1056 of 1558
TM 9-2320-366-20-4 Section II. MAINTENANCE PROCEDURES 16-2. POWER DISTRIBUTION PANEL (PDP) COVER AND LATCH REPLACEMENT/ ADJUSTMENT This task covers: a. Removal b. Installation c. Latch Adjustment INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Goggles, Industrial (Item 15, Appendix C) Tools and Special Tools (Cont) Drill Set, Twist (Item 6, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Material/Parts Rivet, Blind (4) (Item 248, Appendix G) a. Removal. (1) Pull two spring catches (1) and lift two latch levers (2). (2) Release two latch hooks (3) from two strike plates (4). (3) Remove PDP cover (5) from dashboard (6). WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (4) Remove four rivets (7) and two strike plates (4) from PDP cover (5). 16-2 Change 1