TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1051 of 1558
TM 9-2320-366-20-4 (4) Position two clamps (7) on rear stabilizer bar (2) with four bolts (8) and self-locking nuts (9). (5) Position bushing (10), spacer (11), and two washers (12) in bracket assembly (13). (6) Install two pins (14) in washers (12) until flush. (7) Position bracket assembly (13) in bracket (3) with bolt (15) and self-locking nut (16). (8) Perform steps (1) through (7) on left side of rear stabilizer bar. e. Installation. NOTE Left and right sides of rear stabilizer bar are connected the same way. Right side shown. WARNING Rear stabilizer bar weighs approximately 50 lbs (22 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant. (1) Position rear stabilizer bar (1) under vehicle and support with trestles. Change 1 15-13