TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1050 of 1558
TM 9-2320-366-20-4 15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT) c. Inspection. NOTE • If axle brackets fail visual inspection, notify DS Maintenance. • Replace any part that fails visual inspection. • Perform step (1) on both sides of vehicle. (1) Inspect axle brackets (1) and welds around axle brackets for cracks and corrosion. (2) Inspect two resilient mounts (2) for cracks, breaks, or deterioration. (3) Inspect two brackets (3) for cracks, breaks, or corrosion. (4) Inspect two brackets (4) for cracks, breaks, or corrosion. d. Assembly. NOTE Left and right sides of rear stabilizer bar are assembled the same way. Right side shown. (1) Install resilient mount (1) on rear stabilizer bar (2). (2) Install bracket (3) on resilient mount (1). (3) Position bracket (4) on bracket (3) with four bolts (5) and self-locking nuts (6). 15-12 Change 1