TM-9-2320-366-20-4 MTV Unit Maintenance Manual M1083 Series - Volume 4 Download
Page 1048 of 1558
TM 9-2320-366-20-4 15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT) (2) Remove self-locking nut (2), bolt (3), and bracket assembly (4) from frame bracket (5). Discard self- locking nut. (3) Remove self-locking nut (6) and bolt (7) from axle bracket (8). Discard self-locking nut. WARNING Rear stabilizer bar weighs approximately 50 lbs (22 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (4) Perform steps (2) and (3) on left side of rear stabilizer bar. NOTE Step (5) requires the aid of an assistant. (5) Remove rear stabilizer bar (1) from vehicle. 15-10